Many people are chasing the outlook of carbon fiber. But when it get damaged or when you are going to change the color or refresh the outlook, there comes a question of how to remove it so that the adhesive can remove completely.

There are some methods which is helpful. Take the steps for reference.

1. You can use a hair dryer or heat gun to blow the surface of carbon fiber sheet, but the important point is that you don't need to use a high heat dryer or heat gun, or it will bring to the opposite side. After you blow, it will become soft so that easy for you to peel of the material and have not effect on the vehicle or others.

   
   




2. Remove the carbon fiber vinyl film carefully, if it is still hard to peel off, you can use the heat gun or air dryer at the same time, in this way, it will be much easier for you to remove.

   
   




3. After peel of the material, you can use a soap to clean the surface where you used the carbon fiber fabric.

   
   

Don't neglect the importance of the steps; it will make it much easier.